REL0.2
Page 23 of 110
iWave Systems Technologies Pvt. Ltd.
Zynq Ult MPSoC (ZU11/17/19EG) SOM DevKit Hardware User Guide
2.4.1.2
Display Port Connector
The Zynq Ult MPSoC (ZU11/17/19EG) Carrier board supports one Display port connector through PS-GTR Lanes
of Zynq Ult MPSoC (ZU11/17/19EG) PS. PS-GTR Lane0 & Lane1 from Board to Board Connector1 is connected
to Display port connector to support single or dual lane display port. The PS-GTR Lane selection to Display port
connector is done through PS-GTR Lane Selection Switch (SW6).
The Display port connector supports AUX+ & AUX- signals from the PL Bank IOs. Also it supports Hot plug detect signal
and connected to PL Bank IO. This Display Port connector (J21) is physically located at the top of the board as shown
below.
Note: For more details on PS-GTR Lane selection options, refer
Figure 9: Display Port Connector