REL0.2
Page 52 of 110
iWave Systems Technologies Pvt. Ltd.
Zynq Ult MPSoC (ZU11/17/19EG) SOM DevKit Hardware User Guide
2.5.5
FMC HPC Connector
The Zynq Ult MPSoC (ZU11/17/19EG) Carrier board supports one 400Pin Standard FMC HPC connector to
support standard ANSI/VITA 57.1 FMC modules.
The FMC HPC Connector (J22) supports the below mentioned interface from Zynq Ult MPSoC (ZU11/17/19EG).
•
10 GTH High Speed Transceivers
•
2 GTH Reference Clock
•
Upto 06 LVDS IOs/12 Single ended (SE) IOs from HP Bank
•
2 Clock Input Capable LVDS/SE pins from HP Bank
•
1 Clock Output Capable LVDS/SE pins from HP Bank
•
Upto 03 LVDS IOs/06 Single ended (SE) IOs from HD Bank
•
3 Clock Output Capable LVDS/SE pins from HD Bank
•
Upto 1 Single ended (SE) IOs
This 400Pin FMC HPC connector (J22) is physically located at the top of the board as shown below.
Figure 27: FMC Connector