REL0.2
Page 67 of
110
Zynq-Ult MPSoC (ZU11/17/19EG) SOM Development Platform Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
2.5.6
FMC+ HPC Connector
The Zynq Ult MPSoC (ZU11/17/19EG) Carrier board supports one 560Pin FMC+ HPC connector to support standard ANSI/VITA
57.4 FMC modules.
The FMC+ HPC Connector (J14) supports the below mentioned interface from Zynq Ult MPSoC (ZU11/17/19EG) SOM module.
•
8 GTY High Speed Transceivers
•
2 GTY Reference Clock
•
16 GTH High Speed Transceivers
•
4 GTH Reference Clock
•
Upto 20 LVDS IOs/40 Single ended (SE) IOs from HP Bank
•
2 Clock Input Capable LVDS/SE pins from HP Bank
•
2 Clock Output Capable LVDS/SE pins from HP Bank
•
Upto 09 LVDS IOs/18 Single ended (SE) IOs from HD Bank
•
3 Clock Input Capable LVDS/SE pins from HD Bank
This 560Pin FMC+ HPC connector (J14) is physically located at the top of the board as shown below.
Figure 29: FMC+ Connector