-
4
-
Safety Section
Caution
•
Arrange grounding
Do not operate the pump without connecting the grounding wire. Otherwise, an
electrical shock may result. Make sure the grounding wire is connected with
grounding terminal.
Grounding
•
Install an earth leakage breaker
The operation of a pump without using an earth leakage breaker may cause an
electrical shock. Please install a leakage breaker in the system.
Electrical Shock
•
Handling of power cable
Use of a defective or damaged power cable may result in a fire or electrical shock.
Handle the power cable carefully.
Electrical Shock
•
Follow the instruction manual
Replace the consumable part by following the descriptions in the instruction manual.
Do not disassemble any part of the pump if the disassembling procedure for the part
in question is not included in the instruction manual.
•
Disposal of used pump
Disposal of used or damaged pumps must be done in accordance with the relevant
local law and regulations. (Consult a licensed industrial waste products disposing
company.)
•
Limited operating site and storage
Do not install or store the pump in the following places :
Places where a flammable gas or material is used or stored.
Places where the ambient temperature is extremely high (40 °C or higher) or
extremely low (0 °C or lower).
Prohibited
