IWAKI PUMPS EH-E Series, Инструкция по эксплуатации, Страница: 39 / 52

-
37
-
(6) Push EXT key to confirm the value at SET point 1 and
move to the setting of stroke rate for the current value of
SET point 1. The words PO is displayed and SET and 1
light.
(7) Setting of stroke rate for the current value at SET point 1
Set the stroke rate for the current value at SET point 1
by
▲
and
▼
keys. Setting range is 0 - 360 spm. The
pump is set at 0 spm when it is shipped from the factory.
(8) Push EXT key to confirm the set current value at SET
point 1 and move to the setting of the input current value
at SET point 2.
Display shows A20.0 and SET and 2 light.
(9) Setting of current value at SET point 2
Push
▲
and
▼
keys to set the current value at SET point
2. Do not set the value which is set at SET point 1.
Set range is 0.00 - 20.00 mA.
The pump is set at 20.00 mA when it is shipped from fac-
tory.
(10) Push EXT key to confirm the set current value at point 2
and move to the setting of stroke rate vs current value of
SET point 2. Display shows P360 and SET and 2 light.
(11) Setting of stroke rate for the current value of SET point 2
Push
▲
and
▼
keys to set the stroke rate for the current
value at SET point 2. Do not set the value which is set
for SET point 1.
Set range is 0 - 360 spm.
The pump is set at 360 spm when it is shipped.
EXT
START/STOP
EH-E
ON
EXT STOP OVER WAIT
P 0
1
2
SET
EXT
START/STOP
EH-E
ON
EXT STOP OVER
WAIT
P 0
1
2
SET
EXT
START/STOP
EH-E ON
EXT STOP OVER WAIT
A20.0
1
2
SET
EXT
START/STOP
EH-E ON
EXT STOP OVER WAIT
A 9.0
1
2
SET
EXT
START/STOP
EH-E ON
EXT STOP OVER WAIT
P360
1
2
SET
EXT
START/STOP
EH-E
ON
EXT STOP OVER WAIT
P350
1
2
SET