Declaration on the installation of incomplete machine
(according to
EC Directive on Machinery 2006/42/EC, Annex II B)
The manufacturer,
ITT Austria GmbH
Ernst Vogel-Strasse 2
A-2000 Stockerau, Austria
of the incomplete machine (pumps from the standard product line) hereby declares:
TVS 8.1-… , TVS 8.2-… , TVS 8.3-… , TVS 8.4-… , TVS 10.1-… , TVS 10.2-… , TVS 10.3-… , TVS
12.1-… , TVS 12.2-…
The basic safety and health protection requirements have been applied and complied with for the above-
listed product, in accordance with the Annex I of the above-listed Directive.
Special technical documentation has been prepared, in accordance with Annex VII B.
If necessary we can submit the above-listed special technical documentation, in electronic form on a data
storage medium, to the relevant authorities.
The above-listed special documentation can be requested at the following address:
Dipl. Ing. Gerhard Fasching
Abtlg. Research & Development
ITT Austria GmbH
Ernst Vogel-Strasse 2
A-2000 Stockerau, Austria
The regulations of the following EC Directives have been met:
EN 809
EN 953
EN ISO 12100, part 1
EN ISO 12100, part 2
Startup of operation is forbidden until it is determined – if relevant – that the equipment into which the
above-described machine is to be installed, meets all the regulations of the EC Directive on Machinery,
2006/42/EC.
In Stockerau, 15 January 2010
................................................................................................
Dir. Ing. Peter Steinbach
Production manager
If the pump is delivered to a customer/equipment designer for further installation, the customer/equipment
designer is then required to assure conformity of the entire assembly!
