ItaldibiPack Leo Скачать руководство пользователя страница 4

Страница: 4 / 49

Il presente manuale è di proprietà di

ogni riproduzione, anche parziale, è vietata.

LEO Instructions

Edition:

01/2016

- Revision:

01/16

1 - 02

Contents and purpose of the manual

This manual contains the technical characteristics, performance, transport and

installation

recommendations, operating instructions and preventive and corrective maintenance tasks of

the

machine manufactured by

ITALDIBIPACK S.p.A.

NOTE: This manual is an integral and substantial part of the machine and it
must accompany the machine throughout the machine's working life. Keep this
manual and all attached documentation in a safe place where it is accessible by
all personnel responsible for running or servicing the machine.

ITALDIBIPACK S.p.A.

reserves the right to charge expenses and require the acceptance of

specific clauses concerning intellectual property rights, patent rights and the effective and

functional identity of the product and/or parts of the product before providing additional copies

of the manual.

It is agreed that, other than in the presence of specific written permission from

ITALDIBIPACK S.p.A.

, it is not permitted to distribute this operating manual to third parties in

its entirety or in part, in consideration of the text, illustrations or attached diagrams.

ITALDIBIPACK S.p.A.

reserves the right to make changes to the instruction manual without

notice.
Any change, addition, or removal of machine elements, components, functions or cycles

carried out without prior agreement with

ITALDIBIPACK S.p.A.

automatically releases the

manufacturer from all liability.
This manual is dedicated to the machine user and maintenance technician with the aim of

informing them of the main technical data and providing a technical description of the various

functional units and the main operating procedures and information required to perform

preventive and corrective maintenance work.

The manual is addressed to persons with a good technical background in the operating

process and familiarity with the mechanical and electrical diagrams, and it is addressed to

machine operating personnel and service technicians alike.

This manual contains information to ensure that all persons using the machine are able

to work in safety and to guarantee perfect efficiency of the machine throughout its entire

working life.

For correct use of the machine it must be installed in a workplace that is in compliance with

current health and safety regulations.

The contents of this document cannot be duplicated, reproduced or transferred to third

parties without the express written permission of

ITALDIBIPACK S.p.A.

reserves the right to change the characteristics of the machine

described in this document, without notice.

ITALDIBIPACK S.p.A.

General instructions and warnings

Содержание Leo


















































Результаты поиска

Содержание Leo

Отзывы:

Похожие инструкции для Leo

Бренды по названию

Популярные бренды

ItaldibiPack Leo, Инструкция по эксплуатации

Результаты поиска

Содержание Leo

Отзывы:

Похожие инструкции для Leo

Бренды по названию

Популярные бренды