Il presente manuale è di proprietà di
ogni riproduzione, anche parziale, è vietata.
LEO Instructions
Edition:
01/2016
- Revision:
01/16
Switching off the robot
Press
ON/OFF
and turn the key anti-clockwise, to switch-off the machine.
CAUTION
For safety reasons, DO NOT switch-off the machine when the film roll holder car riage
is not in low position!
IMPORTANT
Constantly check the battery charge status.
Recharge it every time the display shows a voltage below
18V.
In the event the battery voltage drops too low, the supplied
battery charger (electronic type) is unable to recharge
them.
It will be necessary to remove the cover and use a traditional battery
charger.
Each battery must be disconnected and separately powered at 12V.
Operation to be performed by an electrical maintenance technician.
27
USING THE MACHINE
continued Operation
Film tension adjustment
If the film tension is too low, the touching arm moves too far away from the pallet
edge, caus ing the robot to rotate on itself with the subsequent intervention of the
safety devices.
If needed, adjust the tension of the film by
acting the knob (Fig. 27).
Clockwise rotation =
Tension increase
Anti-clockwise rotation =
Tension decrease
5 - 07
