Isuzu N Series 2008, Руководство пользователя

Страница: 305 / 580

5-15
COMFORT AND CONVENIENCE
1. Press the AUTO switch (1). The air
conditioning system will turn on, and
automatically select the air outlets
and fan speed most suitable for the
cab's interior condition. The selected
air outlets will be those corresponding
to either the " ", "
" or " " mode.
The display will then show "AUTO
A/C".
Automatic Air Conditioning Mode
2. Use the temperature control dial (4)
to set the interior temperature to the
preferred level. The display will show
the set temperature. Each turn by
one notch makes a change of 0.5°C
(0.9°F). The adjustable temperature
range is between 18°C (64°F) and 32
°C (90°F). If you set the temperature
at 18°C (64°F), the system invariably
sets the control for maximum cooling;
if you set it at 32°C (90°F), the system
sets the control for maximum heating.
When you press the OUTSIDE
switch, "OUTSIDE" will be shown
on the display and the outside
air temperature will be indicated.
Pressing the OUTSIDE switch (3)
again will return the display to the set
temperature indication.
NOTE
Although the temperature can be set in the range of 18°C (64°F) to 32°C (90°F), •
the number displayed shows an approximate temperature. You may thus need
finer adjustments for the preferred temperature.
As the heater uses the heat from the engine coolant, its heating effect is weak
•
when the coolant temperature is low.
Turn on the warm-up switch to increase the heat.
Warm-Up Switch
V
→ Refer to page 4-63
2008N_sec05_print2.indd 15 3/09/2008 5:37:19 PM