Isuzu N Series 2008 Скачать руководство пользователя страница 391

Страница: 391 / 580

7-45

SERVICE AND MAINTENANCE

4JJ1 Engine Model or 4HK1 Engine

Model with 50A Alternator

Adjustment

1. Loosen the alternator's upper and

lower nuts and bolts (1, 2).

2. Turn the adjusting bolt (3) until the

belt tension falls within the standard

value range.

3. After adjustment, firmly tighten all the

loosened nuts and bolts.

Changing the Belt

1. Remove the air conditioning

compressor belt.

2. Loosen the alternator's upper and

lower nuts and bolts (1, 2), and then

detach the belt from the pulleys.

3. Take out the belt through the opening

in the fan.

4. Insert the new belt through the

opening in the fan and install the belt

while aligning its grooves with those

in the alternator pulley and crankshaft

pulley.

5. Turn the adjusting bolt (3) until the

belt tension falls within the standard

value range.

6. After adjustment, firmly tighten all the

loosened nuts and bolts.

7. Install the air conditioning compressor

belt.

4JJ1 engine model

4HK1 engine model with a 50A

alternator

Adjustment and Replacement

2008N_sec07-1_print2.indd 45

3/09/2008 5:47:42 PM

Содержание N Series 2008





































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание N Series 2008

Отзывы:

Isuzu N Series 2008, Руководство пользователя, Страница: 391 / 580

Результаты поиска

Содержание N Series 2008

Отзывы: