Isuzu N Series 2008 Скачать руководство пользователя страница 171

Страница: 171 / 580

4-43

CONTROLS AND INSTRUMENTS

SVS (Service Vehicle Soon) Indicator Light

The SVS indicator light will come on when

the ignition switch is in the "ON" position

and the engine is not started, to let you

know the bulb is working.
The indicator light will go off after the

engine starts.
If the indicator light comes on during

operation, immediately contact the nearest

Isuzu dealer for inspection.

Water Separator (Fuel Filter) Warning Light

This warning light comes on (a model

without multi-information display (MID))

or the message appears on the display (a

model with MID) when water in the water

separator (fuel filter) needs draining.

Drain water following the instructions in the

"Draining Water from the Fuel Filter" and

make sure the warning light goes out.

CAUTION

If this warning light comes on (a

•

model without MID) or appears on

the display (a model with MID) while

the engine is running, immediately

drain water from the fuel filter. If

you still continue driving with the

warning light on (a model without

MID) or with the message on the

display (a model with MID), the fuel

injection pump may fail.

Draining Water from the Fuel Filter

→ Refer to page 7-58

Bleeding the Fuel System

→ Refer to page 8-15

Model without MID

Model with MID

2008N_sec04-1_print2.indd 43

3/09/2008 5:28:40 PM

Содержание N Series 2008





































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание N Series 2008

Отзывы:

Isuzu N Series 2008, Руководство пользователя, Страница: 171 / 580

Результаты поиска

Содержание N Series 2008

Отзывы: