Isuzu N Series 2008 Скачать руководство пользователя страница 77

Страница: 77 / 580

2-47

IMPORTANT INFORMATION

Applying the Parking Brake

ADVICE

Except in an emergency, do not apply the parking brake until the vehicle has

•

come to a complete stop. Applying the parking brake before the vehicle has

stopped can cause a breakdown.

Stopping and Parking

Parking

ADVICE

Choose a flat place where stopping and parking are permitted and where the

•

vehicle will not obstruct traffic. Firmly apply the parking brake and make sure

the vehicle does not move.
Avoid parking for long periods with cargo on the vehicle.

•

Remove all dirt from the vehicle's light lenses and reflectors to ensure that the

•

vehicle can be seen from other vehicles.

Parking Brake Lever → Refer to page 4-77

Parking Safely on a Slope

LNU720SH002901

CAUTION

Avoid parking your vehicle on a

•

slope as much as possible and

choose a level and flat place. If it is

unavoidable to park your vehicle on

a slope, be sure to set the parking

brake fully, make sure that the

vehicle does not move, and block

the wheels with chocks for added

safety. Also, leave the vehicle in

gear to further ensure that it will not

move.
Leave the steering wheel turned such

•

that the vehicle will be stopped by an

obstruction (for example, the curb) in

the unlikely event that it moves.

Parking in Gear → Refer to page 4-87

2008N_sec02_print2.indd 47

15/09/2008 10:36:50 AM

Содержание N Series 2008





































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание N Series 2008

Отзывы:

Isuzu N Series 2008, Руководство пользователя, Страница: 77 / 580

Результаты поиска

Содержание N Series 2008

Отзывы: