Isuzu N Series 2008 Скачать руководство пользователя страница 320

Страница: 320 / 580

5-30

COMFORT AND CONVENIENCE

Operating Tips for the Radio and CD Player

CAUTION

Operate the radio or CD player only while the vehicle is stationary. Operating

•

them while the vehicle is moving could cause an accident.
Adjust the volume so that sound outside of the vehicle can be heard. If outside

•

sound cannot be heard, accidents may be harder to avoid.
Do not install a radio equipment antenna near the vehicle's radio antenna. This

•

could cause unwanted noise on the radio or while playing a CD.

Operating the CD Player

Only CDs with "

" mark can be used.

ADVICE

On cold or rainy days, condensation may form in the CD player preventing

•

normal operation. If this occurs, eject the CD and use the air conditioning

system to dehumidify or ventilate the cab interior for a while before reinserting

the CD.
Rough road driving with severe vibrations may cause the CD to skip.

•

Using benzene, record disk cleaner or anti-static fluids may damage the CD.

•

If a CD is dirty, wipe it with a soft cloth moistened with water to remove dirt and

then wipe it again with a dry cloth to remove all the moisture.

Wipe the CD from the centre to the edge.
CDs are easily damaged by heat, so do not place them in direct sunlight or near

•

an air outlet during heating.

2008N_sec05_print2.indd 30

3/09/2008 5:37:36 PM

Содержание N Series 2008





































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание N Series 2008

Отзывы:

Бренды по названию

Популярные бренды

Isuzu N Series 2008, Руководство пользователя

Результаты поиска

Содержание N Series 2008

Отзывы:

Бренды по названию

Популярные бренды