manualshive.com logo in svg

Isuzu N Series 2008, Руководство пользователя

Поделиться
Скачать
Isuzu N Series 2008 Скачать руководство пользователя страница 351

7-5

SERVICE AND MAINTENANCE

ADVICE

Use only appropriate tools.

•

 

Oils, brake fluid, battery fluid and engine coolant have lubrication, cooling 

•

 

and rust prevention functions. If these liquids deteriorate through loss or 

contamination, it will cause a decline in the performance of the parts and such 

problems as seizure or malfunctioning. Replenish or change these liquids when 

performing the checks (daily and periodic checks) as required by the relevant 

regulations or in accordance with the Maintenance Schedule (when either the 

specified driving distance or period of time, whichever comes first, has expired).
Confirm that all systems and components are normal after performing the work.

•

 

Do not leave the removed parts or tools in the engine compartment. They could 

•

 

damage the equipment if caught in the belts or other moving components.
Dirty water, dirt and other impurities seriously impair the effectiveness of the oil, 

•

 

grease and fluids, and damage the parts. Exercise all due caution to prevent 

waste or other refuse from coming in contact with parts or materials that have 

been removed when changing or replenishing them.

2008N_sec07-1_print2.indd   5

3/09/2008   5:47:15 PM

Содержание N Series 2008





































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды