Isuzu N Series 2008 Скачать руководство пользователя страница 397

Страница: 397 / 580

7-51

SERVICE AND MAINTENANCE

Change the fuel filter in accordance with the Maintenance Schedule.

Drain the water when the water separator (fuel filter) warning light comes on.

Water Separator (Fuel Filter) Warning Light

Fuel Filter

When a certain amount of water has

collected in the water separator, the water

separator (fuel filter) warning light comes

on.

When this happens, drain the water and

make sure that the warning light has gone

out.

Draining Water from the Fuel Filter

→

Refer to page 7-55

CAUTION

Water remaining that is not discharged from the water separator could freeze

•

and damage the vehicle.
If the warning light comes on while the engine is in operation, immediately drain

•

the water from the water separator (fuel filter). Continuing to drive with the light

remaining on could damage the fuel injection pump. If this happens, have the

vehicle checked and serviced by the nearest Isuzu Dealer.

Maintenance Schedule

→

Refer to page 7-159

Model without multi-information

display (MID)

Model with MID

2008N_sec07-1_print2.indd 51

3/09/2008 5:47:46 PM

Содержание N Series 2008





































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание N Series 2008

Отзывы:

Бренды по названию

Популярные бренды

Isuzu N Series 2008, Руководство пользователя

Результаты поиска

Содержание N Series 2008

Отзывы:

Бренды по названию

Популярные бренды