Iseki SZ330, Руководство по эксплуатации

Страница: 19 / 96

18
9.3. When servicing the Zero turn mower or mounting or
dismounting the mower deck, place the Zero turn
mower on level, hard ground.
9.4. Service the Zero turn mower in a place sufficiently
illuminated, or darkness may cause unexpected
accidents.
9.5. Do not adjust or repair the Zero turn mower while
the engine is running.
9.6. When servicing the Zero turn mower or mounting or
dismounting the mower deck, stop the engine and
remove the key (if applicable) to prevent someone
from accidentally starting the engine and apply the
parking brakes.
9.7. The engine, muffler, radiator, etc. are very hot just
after operation, so wait until those heated parts cool
down sufficiently to avoid burns.
9.8. Never remove the radiator cap while the engine is
hot or running. Wait until the engine cools down and
then relieve the radiator pressure by releasing the
radiator cap. Carelessly pouring cooling water into
the heated radiator can cause serious damage to
the radiator and the engine. Careless removal of
the radiator cap can cause serious injury because
of superheated water vapor.
9.9. Before servicing the Zero turn mower, be sure to
turn off the PTO switch to the OFF position and
make sure that the mower blades have stopped
completely. Rotating blades may casue serious
accidents.
9.10. While adjusting the Zero turn mower, keep your fin-
gers away from all pinch points.
9.11. When servicing the Zero turn mower, use proper
tools. Using makeshift tools may lead to injuries or
poor service, which may result in unexpected acci-
dents during operation.
9.12. When removing a tyre, chock other tyres and sup-
port the Zero turn mower securely. When installing
tyres, be sure to tighten the wheel nuts to the speci-
fied torque. Loose nuts may cause serious acci-
dents.
9.13. The cutting means(s) are sharp and can cut you.
Wrap the cutting means(s) or wear leather gloves
when you service them.On the front mower with two
or more cutting means rotating one cutting means
may cause the other cutting means(s) to rotate.
9.14. Never step on the mower deck, or the mower deck
may be damaged or deformed, which may lead to
breakdown or accidents.
FIG. 10
ZERO TURN MOWER