Iseki SZ330, Руководство по эксплуатации

Страница: 46 / 96

45
CAUTION:
• Never attempt to push the drive control
lever abruptly, or Zero turn mower will
dash forward, which is very dangerous.
• Before changing travelling directions, be
sure that the Zero turn mower has stopped
travelling completely.
• When reversing, be sure of the safety con-
ditions behind Zero turn mower.
5. STOPPING
a. Release the drive control lever and shift to lock posi-
tion.
b. Shift the throttle lever to the low speed (
t
) position to
slow down the engine.
c. Depress the brake pedal and lock the parking brakes
securely.
CAUTION: Park the Zero turn mower on flat,
level ground and make sure that the parking
brakes are applied securely.
d. Shift the lift lever to down position ( d ) to lower the
mower deck onto the ground.
CAUTION: When stopping the Zero turn
mower, lower the mower deck onto the ground
without fail to avoid accidents unexpectedly.
6. PTO SWITCH
PTO switch, 1, is used to engage and disengage the PTO
drive system.
The switch must first be turned to right and then pulled up
to engage PTO.
To disengage PTO, push the PTO control switch, 1.
CAUTION: PTO switch is equipped with a
lock-out to prevent accidental engagement of
PTO system. To engage PTO, first turn switch
clockwise and then pull up it. DO NOT
FORCE SWITCH.When starting engine, be
make sure that PTO switch is OFF.
CAUTION: Always shut off PTO and shut off
Tractor engine before servicing PTO-driven
implement. Allow all movement and motion
to stop before leaving operator's seat.
CHAPTER 7. OPERATION
25
1
FIG. 44