Iseki SZ330 Скачать руководство пользователя | Manualshive

Страница: 18 / 96

background image

17

7.6. Use only an approved fuel container to store fuel.

7.7. Do not store the front mower or the fuel container

near a source of open flame, such as a water
heater.

7.8. Replace all fuel tank and container caps securely.

7.9. To prevent personal injury and property damage do

the following:
- Always place fuel containers on the ground and

away from the vehicle before fuelling.

- Do not fill the fuel container(s) inside a vehicle or

on a truck or trailer bed.

- When practical remove a fuel-powered the front

mower from the truck or trailer and refuel it with
its wheels on the ground.

- If it is not practical to do this, refuel the front

mower on a truck or trailer from a portable con-
tainer, not fuel dispenser nozzle.

- If you must use a fuel dispenser nozzle, keep the

nozzle in contact with the rim of the fuel tank or
fuel container opening until you have completed
fuelling.

8. MOUNTING AND DISMOUNTING OF THE MOWER

DRIVE SHAFT

The mower gear box is driven through a drive shaft with
universal joints from the Zero turn mower. When connect-
ing or disconnecting the shaft, follow the next instructions.

8.1. Lower the mower deck onto the gournd, stop the

engine, draw the engine key, and apply the parking
brakes before mounting or dismounting the drive
shaft.

8.2. Shift the PTO switch to the OFF position (

N

).

8.3. Make sure that the PTO shaft and mower blades

stop completely.

8.4. The drive shaft should be mounted or dismounted

at the Zero turn mower side. Never leave the shaft
connected only at the Zero turn mower side. If the
PTO shaft be driven unexpectedly, the shaft will be
swung around and damage the Zero turn mower or
cause serious accidents.

9. ZERO TURN MOWER MAINTENANCE:

9.1. Never start the engine in a closed place. Exhaust

fumes contain poisonous carbon monoxide, so suf-
ficient ventilation should be provided when starting
the engine indoors.

9.2. Be sure to wear safety glasses and gloves when

servicing the Zero turn mower.

FIG. 9

CHAPTER 1. FOR SAFE OPERATION

«
...
16
17
18
19
20
...
»

Содержание SZ330

































































































Отзывы:

Нет отзывов

Похожие инструкции для SZ330

Бренд: Yard Machines Страницы: 44

Бренд: Yardworks Страницы: 21

Бренд: Viking Страницы: 56

Collector 543e Mono

Бренд: Stiga Страницы: 39

Бренд: Lastec Страницы: 50

Бренд: Ariens Страницы: 76

Бренд: Mowox Страницы: 219

Бренд: Toro Страницы: 52

Бренд: Parkside Страницы: 52

PERFORMANCE 50562X89

Бренд: YARD KING Страницы: 60

Бренд: MTD Страницы: 32

Бренд: Craftsman Страницы: 60

Бренд: Craftsman Страницы: 60

Бренд: Craftsman Страницы: 60

Бренд: Craftsman Страницы: 56

Бренд: Craftsman Страницы: 60

Бренд: Craftsman Страницы: 24

Бренд: Craftsman Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды