Iseki SZ330, Руководство по эксплуатации

Страница: 82 / 96

83
CAUTION:
• When servicing the zero turn mower, place
it on level, hard ground.
• Stop the engine and remove the starter key.
• Apply the parking brake securely.
• Shift the lift lever to down position (
d d
) to
lower the mower to the ground.
• Turn the PTO switch to the STOP position
(
N N
).
• Service the zero turn mower after the
engine has cooled down sufficiently.
With these items in mind, confirm the safety condi-
tions for maintenance operation without fail ahead
of time.
1. INSPECTION AND REPLACEMENT OF GEAR CASE
OIL
• Inspection of oil level in the bevel gear case
IMPORTANT: Check the oil level after every 50 hours of
operation.
a. Bevel gear case: Remove the level plug,2, located on
the left side wall of the gear case.
b. Check to see if a small amount of oil overflows
through the plug hole. If so, the level is normal. If not,
replenish with gear oil SAE80 through the plug hole
using an oil pitcher or the like.
IMPORTANT: Before replacing the level plug, by sure to
wrap the threads with sealing tape without
fail, or oil may leak through the plug.
• Replacement of oil
IMPORTANT: Replace oil after the initial 50 hours of
operation and then after every 200 hours
of operation.
a. Remove both belt covers (LH and RH).
b. Remove the level plug and drain plug. Then drain
all oil by tilting the gear case.
(1) Gear case (2) Level plug
(1) Gear case (3) Drain plug
(2) Level plug
CHAPTER 5. INSPECTION AND MAINTENANCE OF MAJOR PARTS
2
1
2
1
3
Oil Gear oil SAE 80
Capacity Bevel gear case 0.4 liter (0.09 lmp.gal.)
FIG. 93
FIG. 94
CHAPTER 5. INSPECTION AND MAINTENANCE OF MAJOR PARTS