Iseki SZ330 Скачать руководство пользователя | Manualshive

Страница: 2 / 96

background image

1

INTRODUCTION

INTRODUCTION

Thank you very much for purchasing an ISEKI ZERO TURN MOWER.

This operator’s manual provides the information necessary for operating and maintaining
your tractor safely and properly. The contents are mainly composed of the following two
items:

Safety instructions:

Essential items which you should observe while
operating the tractor

Technical instructions: Essential items which you should observe while

operating the tractor

Before starting to operate the machine for the first time, you should read this operation man-
ual thoroughly and carefully until you are sufficiently familiar with the operation of the
machine to do jobs safely and properly. The manual should be kept in a handy place so you
can refer to it when required. You are advised to refer to it from time to time to refresh your
understanding of the machine.

Your dealer has performed the pre-delivery service on your new machine.
He will discuss with you the operating and maintenance instructions gives in this manual,
and instruct you in the proper and varied applications of this machine. Call on him at any
time when you have a question, or need equipment related do the use of your machine.

Paragraphs in the manual and labels on the machine which are
accompanied by a caution particularly important information about
safe operation to avoid accidents. You should always keep precau-
tions in mind and follow them during operation.

Be sure to wear

personnel protective equipment

during operation

In some of the illustrations used in this operation manual, panels or
guards may have been remove for clarify. Never operate the machine
with these panels and guards removed.
If the removal of a shield is necessary to make a repair, it must be
replaced before operation

All information, illustrations, and specifications contained in this manual are based on the lat-
est information available at the time of publication. The right is reserved to make changes at
any time without notice.

«
1
2
3
4
...
»

Содержание SZ330

































































































Отзывы:

Нет отзывов

Похожие инструкции для SZ330

Бренд: Baroness Страницы: 199

Бренд: P1PE Страницы: 28

Бренд: Qualcast Страницы: 16

Бренд: Viking Страницы: 149

Бренд: Encore Страницы: 20

Бренд: Ransomes Страницы: 81

Бренд: Garten Meister Страницы: 84

Бренд: Bad Boy Страницы: 48

PARK 13-6113-56

Бренд: Stiga Страницы: 2

GrandStand 74574

Бренд: Toro Страницы: 68

Бренд: GGP ITALY SPA Страницы: 72

Бренд: Earthwase Страницы: 20

GRASS 1265 ZSBW

Бренд: Garland Страницы: 172

Бренд: Poulan Pro Страницы: 17

Бренд: Flymo Страницы: 12

Бренд: Yazoo Страницы: 8

Бренд: Honda Страницы: 29

Бренд: Honda Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды