Iseki SZ330 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 96

background image

6

Every time you see the words and symbols shown below in the manual and on the safety decals, you must take note
of their instructions and warning.

DANGER:

This symbol together with the words DANGER indicates an imminently hazadous situation that, if

not avoided, will result in VERY SERIOUS INJURY OR EVEN DEATH.

WARNING:

This symbol together with the word WARNING indicates a potentially hazardous situation that, if

not avoided, could result in SERIOUS INJURY OR EVEN DEATH.

CAUTION:

This symbol together with the word CAUTION is used to indicate a potentially hazardous situation

that, if not avoided, may result in MINOR INJURY.

IMPORTANT:

The word IMPORTANT is used to provide instructions or advice in order to let the Zero turn mower pro-
vide the optimum performance.

NOTE:

The word NOTE is used to indicate points of particular interest for more efficient and convenient repair or oper-
ation.

SAFETY INSTRUCTION:

Essential items which you should observe while operating the Zero turn mower.

TECHNICAL INSTRUCTION:

Items which are necessary to operate, adjust, and servise the Zero turn mower properly.

Before starting to operate the Zero turn mower for the first time, you should read this operation manual thoroughly

and carefully until you are sufficiently familiar with the operation of the Zero turn mower in order to do jobs safely and
properly. You are advised to refer to it from time to time to refresh your understanding of the Zero turn mower.

The manual should be kept in a handy place so you can refer to it when required.

The parts employed in this Zero turn mower may be modified without notice for better performance and quality

and for safety purposes, which may lead to some inconsistency found on your Zero turn mower with the contents of
this manual.

The Zero turn mower is designed to be used on well-kept lawns. Using the Zero turn mower in other places is not

authorized. Besides, the manufacturer will not pay for any damage caused by unauthorized use and the risk is only
borne by the user. Proper use of the Zero turn mower also implies that the user follows the operational, adjusting, and
servicing instructions indicated in the operation manual.

When you have any question about your Zero turn mower, you are always welcome to ask your dealers.

ZERO TURN MOWER

SAFETY FIRST

«
...
5
6
7
8
9
...
»

Содержание SZ330

































































































Отзывы:

Нет отзывов

Похожие инструкции для SZ330

Бренд: Lawn-Boy Страницы: 20

Бренд: Lawn-Boy Страницы: 16

Бренд: Ransomes Страницы: 80

Бренд: Ransomes Страницы: 60

Бренд: Ransomes Страницы: 20

Бренд: Ransomes Страницы: 224

Бренд: Yard Machines Страницы: 16

Бренд: Jacobsen Страницы: 148

Бренд: MTD Страницы: 44

Бренд: Lawn-Boy Страницы: 32

Бренд: Jacobsen Страницы: 20

Бренд: Ryobi Страницы: 16

Бренд: SaMASZ Страницы: 52

Бренд: Yazoo/Kees Страницы: 34

Бренд: Toro Страницы: 48

Бренд: Orbit-Air Страницы: 2

Бренд: Cub Cadet Страницы: 1

Бренд: Cub Cadet Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды