Doc. CEI12166
Rev. 1
Pag. 28 Of 47
2.3.5.10 Set-up options
This selection allows operating on test set-up: pressing it, the following window is displayed.
- With “Save setup” it is possible to give a name to the current settings, and to save it into memory.
Any setting can be saved to and recalled from the memory. Up to 64 settings can be stored and recalled.
Settings are permanently stored in the memory; new settings can be written to the same address after
confirmation.
- After “Load setup” and “Delete setup”, the list of set-up is displayed.
The file recording can take some time: in the meanwhile, the following message is displayed.
If the memory is full, the following message warns the operator.
