Doc. CEI12166
Rev. 1
Pag. 10 Of 47
After diagnostics, the following control window is displayed.
Selections to the right are short-cuts that allow to enter the corresponding selections. They can be
reached by means of the control knob (5), that incorporates a switch: this is possible selecting the item
moving the knob, and then pressing the knob to confirm. Once the item has been reached, moving the
knob the menu moves forwards backwards of one step, so that other programming can be performed;
else, selecting the arrow the menu returns to the main window.
2.3.1 Set
This selection is a short-cut to the “Setup options” selection of the Menu; see below.
2.3.2 Res
This selection is a short-cut to the “Results” selection of the Menu; see below.
2.3.3 Micro-Ohmmeter
This selection is a short-cut to the “Micro-Ohmmeter test” selection of the Menu; see below.
2.3.4 View
With this selection, it is possible to choose which channels will be displayed on the screen: this serves
to minimize the number of traces. Next to this selection, the display self-adjusts so that, so that it is
easier to watch test results. Pressing View, the following window is opened.
