IronKey Workspace W700-SC, Руководство пользователя

Страница: 37 / 45

Installing Boot Camp support drivers
37
APPENDIX 1: IMATION SUPPORT FOR MACINTOSH
IronKey Workspace W700-SC User Guide
INSTALLING BOOT CAMP SUPPORT DRIVERS
Your administrator may have already downloaded and installed the Boot Camp drivers in Windows To Go or
you may have to do this manually. If the drivers have been downloaded but not installed, they should be in a
folder named
BootCamp5.1.5640 or BootCamp5.1.5621 . You can download the files if necessary, see
“Downloading Boot Camp Support Software” on page 40.
• Boot Camp 5.1.5640 supports 2013 (or newer) Mac models
• Boot Camp 5.1.5621 supports Mac models that are older than 2013 but still support Windows 8 or 8.1
For a list of Boot Camp version requirements by Mac model, see “Level of support for Mac models” on page
34, or http://support.apple.com/kb/HT5634.
Installing Boot Camp 5.1 Support Software is a two-step process.
1. Boot Windows To Go
2. Run the setup file to install Boot Camp Support Software
Make sure that you install the version required by the Mac computer you are using. If a driver fails to install
properly, you can manually install it after. For more information, see “Manually installing drivers” on page 39.
If the device will be used on Mac computers with different Boot Camp 5.1 version requirements, you may have
to install specific drivers from the other Boot Camp version to ensure that components, such as Wifi, will work
correctly.
To boot Windows To Go
1 Make sure that the Mac computer is turned off and that no other USB devices are currently plugged in.
2. Plug the device into the USB port.
3. Turn on the computer and immediately hold the Option key (Alt key on a non-Mac keyboard) to open the
Startup Manager .
For a list of all startup key combinations for Intel-based Mac computers, see

http://support.apple.com/kb/ht1533 .