Installing Boot Camp support drivers
39
APPENDIX 1: IMATION SUPPORT FOR MACINTOSH
IronKey Workspace W700-SC User Guide
4.
Important:
After you copy the files, safely eject the USB flash drive that contains the Boot Camp 5.1 Sup-
port Software. If you do not eject the drive, the Startup Manager will not open when you reboot the com-
puter in step 8.
5.
Double-click the
Boot Camp
folder, and then double-click the
setup.exe
file to start the Boot Camp install
process.
6.
When prompted to allow changes, click
Yes
and follow the on-screen instructions.
7.
Important
: Do not click the
Cancel
button in any of the installer dialog boxes. Installation may take a few
minutes. Do not stop the installation process. When the installation is complete, click
Finish
.
8.
A system restart dialog box will appear. Click
Yes
to reboot the computer and complete the installation.
Make sure that you hold the
Option
key to open the Startup Manager, and then select the USB Windows
device option.
9.
The Windows To Go operating system will start. Type the Windows password (if applicable) and press
ENTER
. Follow the instructions on any other Install dialog boxes that may appear. The device is now ready
for use on qualified Macs.
Manually installing drivers
You may have to manually install Boot Camp software drivers in the following situations:
• A Windows To Go component does not work after installing Boot Camp 5.1 Support Software. For
example, if wireless is not working, you can manually install the driver for the network adapter, for
example, BroadcomNetworkAdapter64.exe.
• A Windows To Go component stops working because the version of the installed driver is not sup-
ported on the Mac model you are using. For example, if you install Boot Camp 5.1.5640, wireless may
not work if you use the device with a Mac model that requires Boot Camp 5.1.5621 drivers. You must
manually install the required network driver.
To manually install a driver
1.
On a qualified Mac computer, in Windows To Go, locate and double-click the
Boot Camp
folder. Double-
click the
Drivers
folder. If you are installing a driver from a different version of Boot Camp 5.1 Support
Software, make sure you select the correct Drivers folder.
2.
Double-click the folder for the manufacturer of the component that is not working. For example, for a
wireless driver, try Broadcom.
3.
Double-click the driver executable file for the missing driver. For example, for wireless, try
BroadcomNet-
AdapterWin8x64.exe
.
Содержание Workspace W700-SC
Страница 1: ...IRONKEY WORKSPACE W700 SC User Guide ...
