IronKey Workspace W700-SC, Руководство пользователя

Страница: 15 / 45

Running the Startup Assistant
15
BOOTING FROM A USB DRIVE
IronKey Workspace W700-SC User Guide
Note: Some Dell systems prevent booting from a USB device even when USB is first in the boot order. For
security reasons, if your computer is set to prevent booting from a USB device, you must go directly into the
BIOS system setup to enable boot support. In the BIOS Setup, the “Enable Boot Support” setting is located
under Settings > System Configuration > USB Configuration. For information about how to enter the BIOS
Setup, see “Manually configuring the host computer” on page 8.
To run the IronKey Workspace Startup Assistant
1. Make sure that the host computer is turned on and the host operating system is running.
2. Insert the IronKey Workspace W700-SC device into the USB port of the host computer.
3. Click the Settings button, and from the left sidebar, click Tools , and then click Launch Startup Assis-
tant .
4. When prompted to allow the Startup Assistant to make changes to your computer, click Yes .
5. Read the instructions on the first screen of the Startup Assistant and click Continue .