4
Maintenance and adjustment
79
side. Any tendency to pull to one side
should be counteracted by slacken-
ing off the adjuster nut on the side to
which the tractor pulls.
CAUTION
If, after the full adjustment proce-
dure, brake operation is unsatisfactory,
notify your ITMCO Dealer immediately.
Fig. 32:
PARKING BRAKE
The parking brake should be fully ap-
plied when the parking brake lever is
raised to the third or fourth notch (click)
on the quadrant.
If adjustment is required, ensure that
the rear brakes are correctly adjusted first.
Then adjust the length of the brake cable
by turning the adjuster nuts (Fig. 33).
Fig. 33:
Differential lock (Fig. 34)
Check the differential lock every
500 hours
1. Ensure that the pedal (1) operates free-
ly throughout its complete travel.
2. Turn back the rubber seal (2) covering
the actuator fork lock-nut.
3. Slacken the lock-nut.
4. Unscrew the fork (4) so that the foot
pedal casting just contacts the mount-
ing bracket at the position indicated by
arrow.
5. Tighten the lock-nut and return the
seal to its original position.
Fig. 34:
2
4
1
Содержание ITM 470
