Iran Tractor ITM 470, Инструкция для оператора

Страница: 103 / 122

4
Maintenance and adjustment
96
vertical line (1) at headlight height (4).
5. Mark two points (3) on the horizontal
line representing the distance between
the two headlights, spaced equally ei-
ther side of the vertical line (1).
6. Adjust each headlight individually by
obscuring the other, so that the points
(3) marked on the wall or screen are
in the centre of the beam. The centre
of the headlight beam may be found by
marking the extremities of the beam
both vertically and horizontally, and
dividing by two.
Fig. 61: Headlight beam setting.
1
2
3
3
4
BULB REPLACEMENT
Headlight bulb replacement (Fig. 62)
1. Switch off all light switches.
2. Remove the front grille.
3. Remove the headlight wiring plug (2).
4. Remove the rubber surround (3).
5. Release the spring clip and remove the
failed bulb (4).
6. Fit a new 40/45 watt bulb, reassemble
the light unit and test.
Fig. 62: Bulb replacement.
2
3
4
Indicator and hazard warning light
bulbs (Fig. 63)
Switch off the light.
Direction indicator lights:
1. Unscrew the green lens (1).
2. Pull the bulb (2) from its holder.
3. Fit a new bulb and replace the lens.
Hazard warning light:
1. Pull off the direction indicator switch
lever (3).
2. Unscrew the red lens (4).
3. Pull the bulb (5) from its holder.
4. Fit a new 2 watt mini bulb and replace
the lens and switch lever.
Fig. 63: Replacement of Indicator and hazard
warning lights.
1
3
4
2
5
Instrument Panel (Figs. 64 to 66)
Instrument panel work as electrical