Iran Tractor ITM 470, Инструкция для оператора

Страница: 105 / 122

4
Maintenance and adjustment
98
fitted to tractors. Before changing a bulb,
turn off the respective switch.
Fig. 68 .... Front side and direction indi-
cator light:
Side light 5 watt.
Direction indicator light 21 watt.
To change a bulb:
1. Switch off the light.
2. Loosen the screw(s) (1) and remove the
lens (2).
3. Remove the failed bulb (3) from its fit-
ting.
4. Fit a new bulb(s) as detailed above, re-
fit the lens and tighten the screw(s).
Fig. 68:
1
3
2
Fig. 69 …. Rear light, stop light and di-
rection indicator light:
Rear/stop light 5/21 watt.
Direction indicator light 21 watt.
Fig. 69:
1
3
2
To change a bulb:
1. Switch off the light.
2. Loosen the screws (1) and remove the
cover (2).
3. Remove the failed bulb (3) from its fit-
ting.
4. Fit a new bulb as detailed above, refit
the lens and tighten the screws.
Fig. 70 .... Number plate light:
5 watt.
Fig. 70:
1
3
2
To change a bulb:
1. Switch off the light.
2. Loosen the screw (1) and remove the
cover (2).
3. Remove the failed bulb (3) from its fit-
ting.
4. Fit a new bulb as detailed above, refit
the cover and tighten the screw.
Fuse replacement
The single fuse box for is located under
the battery access panel in front of driver
(Fig. 72). The fuses in the fuse box protect