Iran Tractor ITM 470, Инструкция для оператора

Страница: 74 / 122

4
Maintenance and adjustment
67
To remove the grille pull the lever and
lift out the grille.
Radiator cap (Fig. 4)
WARNING
High pressure steam and hot water.
Remove the radiator cap with extreme
care.
Fig. 4: Radiator cab.
To remove the radiator cap – lift up the
grille - press the radiator cap down and turn
slowly counter clockwise to allow pressure
to escape before removing it. This is par-
ticularly important if the engine is hot.
Fuel filler (Fig. 5)
WARNING
Do not fill with fuel when the engine
is hot or running.
To remove the fuel filler cap, turn it
counter clockwise.
Fig. 5: Fuel filler.
GREAS LUBRICATION
- Grease the
fittings illustrated below with a good qual-
ity lithium – based grease.
Every 100 hours, do greasing.
Fig. 6: Front wheel bearings (2WD) - 2
points.
Grease daily when operating in adverse
conditions.
Fig. 7: Front axle swivel pins (2WD) - 2
points.
One lubrication fitting on each spindle.
Fig. 8: Front axle pivot pin - 1 point.
Fig. 9: Steering column - 1 point.
Fig. 10: Brake pedal bearing - 1 points.
Fig. 11: Lift linkage - 3 points.
Fig. 6: Front wheel bearings - 2WD.