Connecting Your FotoShow
™
Image Center
Typical Connection
Your FotoShow
™
Digital Image Center can be hooked to an NTSC* TV, VCR, or AV receiver.
Your FotoShow Image Center includes a set of RCA cables. Most TVs have RCA connectors.
Check your TV’s user’s manual or the back of your TV to determine whether your TV has
an RCA connector (pictured below). If your TV does not have the connector pictured
below, skip to page 10.
Using the RCA Connectors
1.Connect the yellow RCA cable to the yellow RCA
VIDEO IN
connector on the back of
your TV, VCR, or AV receiver.
2.Connect the yellow RCA cable to the yellow RCA
VIDEO OUT
connector on the back
of your FotoShow
™
Image Center.
3.Connect the RCA audio connector to the
AUDIO IN
connector on the back of your
TV, VCR, AV receiver, or stereo system.
Make sure you match the white cable connector with the white (left, mono)
AUDIO
IN
connector on the back of your TV, VCR, AV receiver, or stereo system. If the
TELEVISION BACK
AUDIO/VIDEO
IN
OUT
VIDEO
LEFT
AUDIO
RIGHT
AUDIO
S-
VIDEO
VHF/UHF
8
FotoShow
™
Digital Image Center User’s Manual
* NTSC is the television standard used in the United States, Japan, and parts of Canada. Your FotoShow
™
Image Center will
not work with PAL or SECAM TVs.
