INVT GD10-0R2G-2-B, Руководство по эксплуатации

Страница: 17 / 125

Goodrive10 Series Mini VFD Installation guidelines
-12-
Environment Conditions
the devices may occur.
Humidity
 RH≤90%

No condensation is allowed. The maximum relative humility should
be equal to or less than 60% in corrosive air.
Storage
temperature
-40°C
–+70°C, and the temperature changing rate is less than
1°C/minute.
Running
environment
condition
The installation site should meet the following requirements.

Keep away from the electromagnetic radiation source;

Keep away from oil mist, corrosive gases and combustible gases;

Ensure foreign object like metal powder, dust, oil and water will not
fall into the VFD (do not install the VFD onto combustible object like
wood);

Keep away from radioactive substance and combustible objects;

Keep away from harmful gases and liquids;

Low salt content;

No direct sunlight.
Altitude

When the altitude exceeds 1000m, derate by 1% for every increase
of 100m.

When the altitude exceeds 3000m, consult the local INVT dealer or
office for details.
Vibration Max. vibration acceleration: 5.8m/s
2
(0.6g)
Installation
direction
The VFD should be installed on an upright position to ensure sufficient
cooling effect.
Note:

Goodrive10 series VFDs should be installed in a clean and ventilated environment
according to enclosure classification.

Cooling air must be clean, free from corrosive materials and electrically conductive dust.
3.1.2 Installation direction
The VFD may be installed on the wall or in a cabinet.
The VFD must be installed in an upright position. Check the installation site according to the
requirements below. See Appendix B "Dimension drawings" for details.