SECTION 9—BACK
R51™and R51LXP
48
Part No. 1106645
3. Position the back angle plate to one of six back angles. Refer to Detail “A” of
FIGURE 9.3.
4. Reinstall the front hex screw and washer, securely tighten with locknut. Refer to
FIGURE 9.3 for correct hardware orientation.
5. Securely tighten the rear hex screw that secures the back adjustment plate to the
wheelchair frame.
FIGURE 9.3
Changing the Back Angle
Back
Angle
Plate
Rear Hex
Screw
(Loosen, but
do not
Remove)
Wheelchair
Frame
Locknut
Washer
Back Angles
85º
90º
95º
100º
105º
110º
Front
Hex
Screw
Back
Angle
Plate
Detail “A”