SECTION 8—ARMS
Part No. 1106645
43
R51™and R51LXP
SECTION 8—ARMS
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.
Adjusting Armrest Height
NOTE: For this procedure, refer to FIGURE 8.1.
WARNING
Make sure the height adjustment lever is in the locked position before using the
wheelchair.
1. Unlock the armrest by flipping the height adjustment lever on the top front of the
armrest to the up (horizontal) position.
2. Adjust armrest to one of five positions.
NOTE: Height adjustment lever MUST be in the unlocked position when placing armrest into the
arm assembly.
3. Lock the armrest by pressing the height adjustment lever into the down (vertical)
position when the desired armrest height is achieved.
4. Repeat STEPS 1-3 for other armrest.
FIGURE 8.1
Adjusting Armrest Height
Locked (Vertical)
Unlocked (Horizontal)
Armrest
Height Adjustment
Lever