Invacare Nutron R51 Скачать руководство пользователя страница 39

Страница: 39 / 80

SECTION 7—FRONT RIGGINGS

Part No. 1106645

R51™and R51LXP

Model 93M, 904A, PAL4A, and PAS4A Footrests

NOTE: For this procedure, refer to FIGURE 7.3.

1. Loosen, but do not remove the lug bolt and locknut that secure the lower footrest to

the footrest support.

2. Reposition the lower footrest to the desired height.

3. Securely tighten the lug bolt and locknut that secure the lower footrest to the footrest

support.

4. Repeat STEPS 1-3

for the other footrest, if necessary.

FIGURE 7.3

Adjusting the Footrest Height - Model 93M, 904A, PAL4A, and PAS4A Footrests

Replacing Heel Loops

NOTE: For this procedure, refer to FIGURE 7.4.

1. Note the position of hex bolt, coved

washers and locknut for reinstallation.

2. Remove the hex bolt, coved washers

and locknut that secure the lower
footrest to the footrest support.

3. Remove the lower footrest.

4. Remove the phillips bolt, spacer and

locknut that secure the existing heel
loop to the lower footrest.

5. Slide the existing heel loop off the

lower footrest.

6. Replace heel loop.

7. Reverse STEPS 1-6 to reassemble.

FIGURE 7.4

Replacing Heel Loops

NOTE: When securing heel loop to lower footrest, tighten the phillips screw and locknut until the
spacer is secure.

NOTE: 93M style footrest shown. 904A, PAL4A and PAS4A footrests adjust the same way.

Lower Footrest

Footrest Support

Lug Bolt

Locknut

Footrest Support

Hex Bolt

Phillips Bolt

Spacer

Locknut

Coved

Washers

Lower Footrest

Heel Loop

Содержание Nutron R51

















































































Результаты поиска

Содержание Nutron R51

Отзывы:

Похожие инструкции для Nutron R51

Бренды по названию

Популярные бренды

Invacare Nutron R51, Инструкция по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Nutron R51

Отзывы:

Похожие инструкции для Nutron R51

Бренды по названию

Популярные бренды