IntesisBox DK-RC-KNX-1i, Руководство пользователя

Страница: 54 / 66

IntesisBox
®
KNX - Daikin A.C. (SKY & VRV line)
User's manual r1.0 eng
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
IntesisBox ® is a registered trademark of Intesis Software SL
URL
Email
tel http://www.intesis.com
info@intesis.com
+34 938047134
54 / 66

Value on rising edge (when contact activated)
This parameter lets define a value for the DTP type configured in the “DPT to
be sent” parameter. This value will be sent on a rising edge (contact activated).
o
When “Execute Scene (internal)” is selected, the binary input “x” will activate the scene
defined in the next parameter, on a rising edge (contact activated).
Figure 4.49 Parameter detail

Scene when contact is activated
This parameter lets choose the scene that will be activated on a rising edge. This scene
MUST be defined in the “Scene Configuration” dialog as a preset.
o
When “Occupancy (internal)” is selected, the binary input “x” will have the same
behavior as configured in the parameter “ ¡Error! No se encuentra el origen de la
referencia. ” inside the “Switch-Off Timeouts Configuration” dialog.
Figure 4.50 Parameter detail
o
When “Window Contact (internal)” is selected, the binary input “x” will have the same
behavior as configured in the parameter “ ¡Error! No se encuentra el origen de la
referencia. ” inside the “Switch-Off Timeouts Configuration” dialog.
Figure 4.51 Parameter detail