IntesisBox
®
KNX - Daikin A.C. (SKY & VRV line)
User's manual r1.0 eng
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SL
URL
Email
tel
http://www.intesis.com
[email protected]
+34 938047134
18 / 66
o
If set to
“no”
the objects will not be shown.
o
If set to
“yes”
the
Status_ Mode
objects for Auto, Heat, Cool, Fan and Dry will appear.
When enabled, a mode will return a
“1”
through its bit-type object.
4.2.7 Enable use of Text object for Mode
This parameter shows/hides the
Status_ Mode Text
communication object.
o
If set to
“no”
the object will not be shown.
o
If set to
“yes”
the
Status_ Mode Text
object will appear. Also, in the parameters, will be
shown five text fields, one for each mode, that will let modify the text string displayed by
the
Status_ Mode Text
when changing mode.
Figure 4.9
Parameter detail
4.2.8 Enable use of Legacy_ object for Mode
This parameter shows/hides the
Legacy_ Mode
communication object.
o
If set to
“no”
the object will not be shown.
o
If set to
“yes”
the
Legacy_ Mode
object will appear. This object lets change the indoor
unit mode but it uses a different data type. It is used to maintain compatibility with old
gateway models.
Auto mode will be enabled with a
“0”
value, Heat mode with a
“1”
value, Dry mode with
a
“2”
value, Fan mode with a
“3”
value and Cool mode with a
“4”
value
4.3 Special Modes Configuration dialog
