Intermec Trakker Antares 2400, Руководство пользователя

Страница: 99 / 134

nugget
39
AGaramond
Chapter 4— Troubleshooting and Maintaining the Terminal
Trakker Antares 242X Handheld Terminal User’s Manual 85
Boot Menu Options
Option Description
Boot System Press
B
to boot the terminal. Once the terminal is finished booting,
your application appears on the screen.
Run Loader Press
L
to load the terminal firmware. To upgrade or load the
firmware, use the Firmware Upgrade option in the TRAKKER
Antares 2400 Menu System. For help, see “Upgrading the Firmware”
in Chapter 2 of the 2400 Family System Manual.
Power Down Press
Q
to turn off the terminal. When you turn on the terminal, the
Boot Menu screen appears again if POST passes.
Troubleshooting a Locked Up Application
If the terminal or application is locked up and the terminal will not
respond to any key sequences, try the following steps to reset the terminal
and perform a warm boot.
To perform a warm boot
1 Press
q
to turn off the terminal. Press
q
to turn on the terminal.
2 Use the TRAKKER Antares 2400 Menu System to reboot the terminal.
a
Press
) y 2 4 8
to enter the TRAKKER Antares 2400 Menu
System.
b
Choose System Menu , and then choose Upgrade Firmware .
c
Choose OK , then YES , and then press
d
. The Boot Menu appears.
d
Press
B
to boot the terminal.
3 Scan the Reset Firmware label to restart the firmware and application.
Reset Firmware
*-.*
*-.*
If the terminal or application still will not respond, reset the terminal. For
help, continue with the next section.
Resetting the Terminal
If you performed the steps in “Troubleshooting a Locked Up Application”
and the terminal or application is locked up and the terminal will not
respond to the Reset Firmware command, follow the steps in this section
to reset the terminal.