Intermec Trakker Antares 2400, Руководство пользователя

Страница: 21 / 134

nugget
39
AGaramond
Chapter 1— Learning About the Terminal
Trakker Antares 242X Handheld Terminal User’s Manual 7
• Information from the Trakker Antares 2400 Family System Manual
Addendum was incorporated: 802.1X security enhancements to provide
new functionality to the current TTLS security and support for Cisco’s
LEAP security. For more information, see “Configuring the 802.1x
Security Parameters” on page 59.
Using the Terminal for the First Time
Before you can use the 242X for the first time, you need to perform certain
steps, such as charging and installing the battery. You can find this
information throughout this user’s manual. However, if you want to start
using the terminal immediately, see the
Trakker Antares 242X Handheld
Terminal Quick Start Guide (P/N 064183).
To use the 242X for the first time
1 Unpack the terminal and documentation.
2
Charge and install the main battery pack (sold separately) and the
backup battery. For more information about batteries, see “Learning
About the Terminal’s Batteries” on page 8.
3 Press
q
to turn on the terminal. For more information about the
keypad, see “Using the Keypad” on page 16.
4
(Optional) Set the time and date. For help using the TRAKKER
Antares 2400 Menu System, see “Configuring the Terminal with the
Menu System” on page 35.
5 (Optional) Configure the serial port parameters. For more information,
see “Using Serial Communications on the Terminal” on page 51.
6
(2425 only) Configure the RF parameters. For more information, see
“Using RF Communications on the 2425” on page 55.
7 (2425 with 802.1x security only) Configure the 802.1x security
parameters. For help, see “Configuring the 802.1x Security Parameters”
on page 59.
8
Enable the bar code symbologies that you want to be able to scan. For
more information, see Chapter 6, “Configuration Command
Reference,” in the 2400 Family system manual.
9 Exit the menu system and save your configuration changes to flash
memory. For help, see “Exiting the Menu System” on page 41.
When you are done with these steps, the default application or TE 2000
application that is loaded on your terminal will start. You are ready to use
the terminal.