Intermec Trakker Antares 2400, Руководство пользователя

Страница: 22 / 134

Chapter 1— Learning About the Terminal
nugget
39
AGaramond
8 Trakker Antares 242X Handheld Terminal User’s Manual
Unpacking the Terminal
When you remove the terminal from its box, save the box and shipping
material in case you need to ship or store the terminal. Check the contents
of the box against the invoice for completeness and contact your local
Intermec service representative if there is a problem.
Learning About the Terminal’s Batteries
The 242X uses two rechargeable batteries:
• Main battery pack. This lithium-ion battery pack is the main power
source for the 242X and charges the backup battery when required.
• Backup battery. The NiCad backup battery provides backup battery
power for a maximum of 1 month if a fully charged main battery pack is
installed or a maximum of 3 days if a main battery pack is not installed.
Learning About the Main Battery Pack
The lithium-ion battery pack that is used in this device may present a
fire or chemical burn hazard if it is mistreated. Do not disassemble it,
heat it above 100ºC (212ºF) or incinerate it.
Attention Danger: Le paquet de piles d’ions de lithium qui est utilisé
dans cet appareil peut presenter un risque feu ou un risque chimique
de brûlure s’il est maltraité. Il ne faut pas le désassembler, le
réchauffer à une température plus élevée que 100o C (212o F) ou
l’incinérer.
The main power source for the terminal is a lithium-ion battery pack.
Follow these tips to get the best battery performance and life possible:
• Keep a charged main battery pack installed in the terminal to maximize
the backup battery’s life.
• When you remove a battery pack, insert another charged battery pack in
the terminal so you can continue to operate the terminal without
interruption.
• If you use the terminal for extended periods of time in a sub-freezing
environment, you may need to change the battery pack more often.
• If you have been using the terminal in a cold temperature environment
and need to replace or charge the battery pack, let the battery packs
warm up for a half-hour before you charge them.
• If you plan to store the terminal for a long period of time, insert a fully
charged main battery pack to maximize battery life.
• Store the battery chargers and spare battery packs in a warm (office)
environment to ensure the most efficient operation.