Intermec Trakker Antares 2400, Руководство пользователя

Страница: 100 / 134

Chapter 4— Troubleshooting and Maintaining the Terminal
nugget
39
AGaramond
86 Trakker Antares 242X Handheld Terminal User’s Manual
To reset the terminal
• Scan the Boot Terminal label to reboot the terminal.
Boot Terminal
*-.1*
*-.1*
If the terminal will not scan, you can cold boot the terminal and perform a
destructive reset. A destructive reset can have unpredictable results.
To perform a cold boot
1 Place the terminal on a flat surface.
2
If possible, press
q
to turn off the terminal.
3
Press and hold the
)
and
;
keys at the same time, and then press
q
while still pressing the other keys. The green scanner LEDs light and the
terminal turns off. Release the keys.
Tip: It helps to press the left side of the
;
key in this key sequence.
4
Press
q
to turn on the terminal. The Boot Menu appears.
BOOT MENU
b - Boot System
l - Run Loader
q - Power Down
POWER DOWN IN 60 SEC
242XU104.eps
Note: If the terminal returns to the exact same screen, the reset
sequence did not work. Repeat Step 1. Make sure you press and hold
the
)
and
;
keys, and then press the
q
key.
5 Press
B
to boot the terminal. Once the terminal has finished booting,
your application appears.
If the terminal still will not reset or boot, try loading the firmware. For
help, contact your local Intermec service representative.