Intermec Trakker Antares 2400, Руководство пользователя

Страница: 40 / 134

Chapter 1— Learning About the Terminal
nugget
39
AGaramond
26 Trakker Antares 242X Handheld Terminal User’s Manual
Using the Scan Module
Do not look directly into the window area or at a reflection of the
laser beam while the laser is scanning. Long-term exposure to the laser
beam can damage your vision.
Attention Danger: Ne regardez pas directement la réflexion d’un rayon
laser ou dans la fenêtre du laser lorsque celui-ci est en opération. Si
vous regardez trop longtemps un rayon laser, cela peut endommager
votre vue.
You can use the scan module accessories with the 242X to scan and enter
bar code data. The terminal decodes the bar code label and enters the data
or command you scanned. For a list of available scan modules, see “Scan
Module Options” in Appendix A.
You can also scan and enter bar code data using an input device connected
to the input device module accessory. For more information, see the
instructions that ship with the module. For a list of available input devices,
see “Input Devices for the Input Device Module” in Appendix A.
Note: You must have a scan module, serial module, or input device
module attached to use the terminal.
When you unpack the 242X, these bar code symbologies are enabled:
• Code 39
• Code 128
• PDF417 (242X terminals with the PDF417 scan module option only)
• UPC/EAN
To scan other bar code symbologies, you must enable them on the 242X.
For help, see Chapter 6, “Configuration Command Reference,” in the
2400 Family system manual.
This section describes how to use the standard range scan module and the
PDF417 scan module. For help using the other scan modules, see the
instructions that ship with the module.
To scan a bar code label with the standard range scan module
1 Press
q
to turn on the terminal.
2 Hold the terminal at a slight angle a few inches from the bar code label.
The laser scan window in the scan module must be pointing toward the
label.
Note: The Scan button on the terminal keypad does not activate the
scanner device connected to the module for cabled scanners.