Intermec Trakker Antares 2400, Руководство пользователя

Страница: 97 / 134

nugget
39
AGaramond
Chapter 4— Troubleshooting and Maintaining the Terminal
Trakker Antares 242X Handheld Terminal User’s Manual 83
Cold Temperatures (Using the 242X in sub-freezing environments)
• If you use the terminal in a cold temperature environment, battery life
will be reduced. Battery life depends on temperature, battery model,
input device, age of the battery pack, your usage, and duty cycle factors.
If you use the terminal for extended periods of time in sub-freezing
environments, you may need to change the main battery pack more
often.
• Do not store the terminal in a cold temperature environment. When
you are not using the terminal, keep it in a warmer area to make sure
the battery chargers will continue operating.
• If the Battery icon blinks, the backup battery charge is low. Move the
terminal to a warmer environment to charge the backup battery. The
backup battery charger operates between 0°C and 40°C (32°F and
104°F). If you are using the terminal in an area outside this temperature
range, the backup battery will not charge.
• Store the battery chargers and spare batteries in a warm (office)
environment to ensure the most efficient operation.
• Charge the main battery pack in an area or room where the temperature
is above freezing.
• If you have been using the terminal in a cold temperature environment
and need to replace or charge either battery, let the batteries warm up
for a half-hour before you charge them.
Booting the Terminal
You seldom need to boot or reset the terminal. When you boot the
terminal, it runs through power-on self test (POST) to test each major
subsystem. The terminal uses the configuration currently saved in flash
memory. After the terminal is finished booting, your application appears
on the screen.
You can boot the terminal using these two methods:
• Configure the
q
key to boot the terminal when you turn on the
terminal.
• Use the Boot Menu.
Booting the Terminal on Resume
When you press
q
to turn off the terminal, it turns off and goes into
Suspend mode. When you press
q
to turn on the terminal, it resumes or
boots depending on the terminal configuration.