Intermec Sabre 1555 RFID, Руководство по обслуживанию

Страница: 20 / 65

Sabre 1555 RFID and Bar Code Reader Service Manual
2-6
You are now ready to replace the handle assembly. For help, see the next procedure.
To remove the handle PCB, continue with the next step.
6. Carefully pull the piezo connector from the piezo jack on the handle PCB.
Piezo jack
7. Disconnect the flex cables from the handle PCB and remove the PCB.
You are now ready to replace the handle PCB. For help, continue with the next
procedure.
To replace the handle PCB or handle assembly
1. Remove the handle assembly as described in the previous procedure.
To replace the handle assembly, continue with step 11 using the new assembly.
To replace the handle PCB, continue with the next step.
2. Position the new handle PCB as shown in the next illustration. Part of the board has
been omitted for clarity.