Intermec Sabre 1555 RFID, Руководство по обслуживанию

Страница: 14 / 65

Sabre 1555 RFID and Bar Code Reader Service Manual
1-6
1555 Troubleshooting Guide (continued)
Problem Steps to Follow
Low RFID throughput. 1. Open the case as described on page 2-12.
For 2.4 GHz versions manufactured before September 2001,
check the digital board for the correct revision (Rev. C printed on
board OR large inductor mounted on board surface during
rework).
Large
inductor
For 2.4 GHz versions manufactured in or after September 2001,
and for all 915 MHz versions, continue with the next step.
2. Make sure the 25-pin flex cable from the RF board to the digital
board is seated properly.
3. Check all flex cables for routing and placement.
4. Replace the digital board as described on page 2-15.