CN70 Barcode Scanner
Knowledge Guide
16 of 25
5.
From the “Search” screen, manually enter
the Barcode/Serial Number/UII into the
search field, or scan (utilizing scan button
on keypad) the barcode number with the
scanner’s laser imager. The barcode
number, once captured, will appear in the
Barcode Search field.
Note:
To use the scanner’s laser imager
function: Press and hold the blue button
located at the top center of the scanner
keypad. While doing so, tilt the scanner
so that the red laser (or light) shines
across the center of the barcode (being
scanned) while holding the scanner
approximately 4 to 10 inches away from
the barcode label. When the scanner
successfully scans (and captures) the
barcode number, it will make a noise
(beep), if not muted. To adjust the scan
beep volume, click the “Up/Down” buttons on the right
side of the scanner).
6.
Once the barcode number has been captured (or manually
entered) and appears in the search field, click the “Enter”
button on the keypad or (utilizing the stylus wand) select the “Search” button
on the screen to submit the search.
