Interlogix NS4702-24P-4S-4X Скачать руководство пользователя страница 84

Страница: 84 / 432

4.3.4 SNMP System Information

The switch system information is provided here. The SNMP System Information screen in

Figure 4-3-3

appears.

Figure 4-3-3:

System Information Configuration Page Screenshot

The Page includes the following fields:

Object

Description



System Contact

The textual identification of the contact person for this managed node, together

with information on how to contact this person. The allowed string length is 0 to

255, and the allowed content is the ASCII characters from 32 to 126.



System Name

An administratively assigned name for this managed node. By convention, this is

the node's fully-qualified domain name. A domain name is a text string drawn

from the alphabet (A-Za-z), digits (0-9), minus sign (-). No space characters are

permitted as part of a name. The first character must be an alpha character. And

the first or last character must not be a minus sign. The allowed string length is 0

to 255.



System Location

The physical location of this node(e.g., telephone closet, 3rd floor). The allowed

string length is 0 to 255, and the allowed content is the ASCII characters from 32

to 126.

Buttons

: Click to apply changes

: Click to undo any changes made locally and revert to previously saved values.

Содержание NS4702-24P-4S-4X

















































































































































































































































































































































































































































Результаты поиска

Содержание NS4702-24P-4S-4X

Отзывы:

Бренды по названию

Популярные бренды

Interlogix NS4702-24P-4S-4X, Руководство пользователя

Результаты поиска

Содержание NS4702-24P-4S-4X

Отзывы:

Бренды по названию

Популярные бренды