Interlogix NS4702-24P-4S-4X Скачать руководство пользователя страница 123

Страница: 123 / 432

123

■

Untag All

All frames, whether classified to the Port VLAN or not, are transmitted

without a tag.



Allowed VLANs

Ports in Trunk and Hybrid mode may control which VLANs they are allowed to

become members of. The field's syntax is identical to the syntax used in the

Enabled VLANs field.

By default, a Trunk or Hybrid port will become member of all VLANs, and is

therefore set to

1-4095

. The field may be left empty, which means that the port

will not become member of any VLANs.



Forbidden VLANs

A port may be configured to never be member of one or more VLANs. This is

particularly useful when dynamic VLAN protocols like MVRP and GVRP must be

prevented from dynamically adding ports to VLANs. The trick is to mark such

VLANs as forbidden on the port in question. The syntax is identical to the syntax

used in the Enabled VLANs field.

By default, the field is left blank, which means that the port may become a

member of all possible VLANs.

The port must be a member of the same VLAN as the Port VLAN ID.

Buttons

: Click to apply changes

: Click to undo any changes made locally and revert to previously saved values.

4.6.4 VLAN Membership Status

This Page provides an overview of membership status for VLAN users. The VLAN Membership Status screen in

Figure 4-6-4

appears.

Содержание NS4702-24P-4S-4X

















































































































































































































































































































































































































































Результаты поиска

Содержание NS4702-24P-4S-4X

Отзывы:

Бренды по названию

Популярные бренды

Interlogix NS4702-24P-4S-4X, Руководство пользователя

Результаты поиска

Содержание NS4702-24P-4S-4X

Отзывы:

Бренды по названию

Популярные бренды