Interlogix NS4702-24P-4S-4X Скачать руководство пользователя страница 118

Страница: 118 / 432

118

information. (Remember that the PVID is only used internally within the Switch). Untagging is

used to send packets from an 802.1Q-compliant network device to a non-compliant network

device.

Frame Income

Frame Leave

Income Frame is

tagged

Income Frame is

untagged

Leave port is tagged

Frame remains tagged

Tag is inserted

Leave port is untagged

Tag is removed

Frame remain untagged

Table 4-6-1:

Ingress / Egress Port with VLAN VID Tag / Untag Table

■

IEEE 802.1Q Tunneling (Q-in-Q)

IEEE 802.1Q Tunneling (QinQ) is designed for service providers carrying traffic for multiple customers across their networks. QinQ

tunneling is used to maintain customer-specific VLAN and Layer 2 protocol configurations even when different customers use the

same internal VLAN IDs. This is accomplished by inserting

Service Provider VLAN (SPVLAN)

tags into the customer’s frames

when they enter the service provider’s network, and then stripping the tags when the frames leave the network.

A service provider’s customers may have specific requirements for their internal VLAN IDs and number of VLANs supported. VLAN

ranges required by different customers in the same service-provider network might easily overlap, and traffic passing through the

infrastructure might be mixed. Assigning a unique range of VLAN IDs to each customer would restrict customer configurations, require

intensive processing of VLAN mapping tables, and could easily exceed the maximum VLAN limit of 4096.

The Managed Switch supports multiple VLAN tags and can therefore be used in MAN applications as a provider bridge, aggregating

traffic from numerous independent customer LANs into the

MAN (Metro Access Network)

space. One of the purposes of the

Содержание NS4702-24P-4S-4X

















































































































































































































































































































































































































































Результаты поиска

Содержание NS4702-24P-4S-4X

Отзывы:

Бренды по названию

Популярные бренды

Interlogix NS4702-24P-4S-4X, Руководство пользователя

Результаты поиска

Содержание NS4702-24P-4S-4X

Отзывы:

Бренды по названию

Популярные бренды