Interlogix NS4702-24P-4S-4X Скачать руководство пользователя

Страница: 121 / 432

121



The VLANs that a trunk port is member of may be limited by the use of

Allowed VLANs



Frames classified to a VLAN that the port is not a member of are

discarded



By default, all frames but frames classified to the Port VLAN (a.k.a.

Native VLAN) get tagged on egress. Frames classified to the Port

VLAN do not get C-tagged on egress



Egress tagging can be changed to tag all frames, in which case only

tagged frames are accepted on ingress

Hybrid

Hybrid ports resemble trunk ports in many ways, but adds additional port

configuration features. In addition to the characteristics described for trunk ports,

hybrid ports have these abilities:



Can be configured to be VLAN tag unaware, C-tag aware, S-tag

aware, or S-custom-tag aware



Ingress filtering can be controlled



Ingress acceptance of frames and configuration of egress tagging can

be configured independently



Port VLAN

Determines the

port's VLAN ID

(

PVID

). Allowed VLANs are in the range 1

through 4095, default being 1.

■

On ingress, frames get classified to the Port VLAN if the port is configured as

VLAN unaware, the frame is untagged, or VLAN awareness is enabled on

the port, but the frame is priority tagged (VLAN ID = 0).

■

On egress, frames classified to the Port VLAN do not get tagged if Egress

Tagging configuration is set to untag Port VLAN.

The Port VLAN is called an "

Access VLAN

" for ports in Access mode and Native

VLAN for ports in Trunk or Hybrid mode.



Port Type

Ports in hybrid mode allow for changing the port type, that is, whether a frame's

VLAN tag is used to classify the frame on ingress to a particular VLAN, and if so,

which TPID it reacts on. Likewise, on egress, the Port Type determines the TPID

of the tag, if a tag is required.

■

Unaware:

On ingress, all frames, whether carrying a VLAN tag or not, get classified

to the Port VLAN, and possible tags are not removed on egress.

■

C-Port:

On ingress, frames with a VLAN tag with TPID = 0x8100 get classified to

the VLAN ID embedded in the tag. If a frame is untagged or priority

tagged, the frame gets classified to the Port VLAN. If frames must be

Содержание NS4702-24P-4S-4X

















































































































































































































































































































































































































































Результаты поиска

Содержание NS4702-24P-4S-4X

Отзывы:

Похожие инструкции для NS4702-24P-4S-4X

Бренды по названию

Популярные бренды

Interlogix NS4702-24P-4S-4X, Руководство пользователя

Результаты поиска

Содержание NS4702-24P-4S-4X

Отзывы:

Похожие инструкции для NS4702-24P-4S-4X

Бренды по названию

Популярные бренды